An inorganic nano ceramic film built without metal. It never disturbs GPS, toll transponder or mobile signals, while delivering fade-free colour stability and powerful heat rejection.
The practical difference made by an inorganic nano ceramic structure with no metal coating.
Inorganic nano ceramic particles reflect and absorb solar heat. Cooler in summer, warmth retained in winter: heat management all year round. TSER measured at 96.7% at the highest density.
Blocks up to 99.9% of UVA and UVB, protecting your skin and the cabin interior. UV rejection of 99.9% (measured) keeps exposure down even on long drives.
The film's adhesive layer holds the glass together, minimising flying fragments in a collision. One more layer of protection for occupants in an unexpected impact.
With no metal in the construction, it does not disturb GPS, toll transponders, mobile phones, radio or other radio signals. Especially suited to late-model vehicles full of electronics.
Not catalogue figures, but values measured directly on a spectrophotometer. Choose the density that balances view brightness against heat rejection.
| Densitynominal | VLTvisible light transmission | TSERtotal solar energy rejected | IRinfrared · 900–1000nm peak | UVUV rejection | GRglare reduction | SHGCsolar heat gain coefficient |
|---|---|---|---|---|---|---|
| 05 | 3.2% | 96.7% | 99.7% | 99.9% | 94.3% | 0.033 |
| 15 | 14.9% | 90.1% | 99.8% | 99.9% | 94.3% | 0.099 |
| 25 | 26.6% | 85.1% | 99.9% | 99.8% | 89.5% | 0.149 |
| 35 | 36.0% | 79.5% | 99.9%+ | 99.6% | 88.2% | 0.205 |
| 50 | 56.2% | 70.2% | 99.6% | 99.9%+ | 80.0% | 0.298 |
| 65 to be confirmed | 67.9% | 60.2% | 99.9% | 99.9% | 60.2% | 0.362 |
| 75 to be confirmed | 72.1% | 60.2% | 99.6% | 99.9% | 26.0% | 0.398 |
※ IR figures are based on the 900–1000nm peak band and cannot be compared directly with the Full IR values (mean of 940 / 1400nm) for Titanium and Platinum, which use a different measurement basis. Re-measurement on the same basis will be published as soon as it is finalised. Values below the measurement limit are shown as 99.9%+. TSER = (1 − SHGC) × 100%. Stated values are measured results for a specific sample; in-vehicle measurements may differ depending on glass type and installation conditions. TSER for densities 65 and 75 is still under review of the source data and will be finalised in the definitive datasheet. Colour-warranty performance follows the terms of the genuine warranty certificate.
All of them are top-tier. Only the material the film is built from differs.
Tell us your vehicle and the density you have in mind and we'll guide you through it with the performance data.